Monday I removed the suspension bolts so that the rear end hung freely. I took the rear end bolts off and the rear end broke loose. 2 Steps Taken to Reach Objective: Objective (s): Work in lab on removing the rear end from the car and getting all of the wires disconnected. List issues / Complications: 1 3 4 I got help and set it up on the table so I could remove the engine so we could work on getting the cvt shaft figured out. none I started by removing all the wires from the motor and making sure to label them to remember where they go. Tuesday After checking and making sure we were level we realized that we really messed up a sprocket and had to troubleshoot 2 Steps Taken to Reach Objective: Objective (s): Work in the lab on the formula rear end getting things fixed and getting it all level. Install laser works if I have time. List issues / Complications: 1 3 4 I started working on installing laser works and helped nick install it on his computer. none I set up the rear end and clamped it down so that it was level and we could get the sprockets level. Wednesday We came up with idea and started working on making the bars to connect and make the stop. 2 Steps Taken to Reach Objective: Objective (s): Work in the lab on getting the throttle stop designed and built so it can be adjusted. List issues / Complications: 1 3 4 I bent the pieces so that they would be in the correct angles to complete the throttle stop. None. Me Kirby and sabo brainstormed and thought of good ideas to use for our throttle stop. Thursday We started designing our device that would hold everything in place and be reliable. 2 Steps Taken to Reach Objective: Objective (s): Work in the lab on the formula rear end getting a design made up for the extra bearing. List issues / Complications: 1 3 4 We got the dimensions and cut the stock to get welded. None. We got all of our odds put out and came up with a nice idea that we can adjust but also hold the bearing in place. Friday Me and garret worked as a team cleaning under the tables and getting all the trash swept up. 2 Steps Taken to Reach Objective: Objective (s): Work in lab on getting it cleaned up and all the tools put away. List issues / Complications: 1 3 4 After break we finished up our cleaning and I came in to work on some laserworks designing my front end of a challenger. none I started by removing things from under the tables so that I could get all the trash out from under them.